Changelogs have moved to this page here:
https://portal.easee.com/changelogs/

New

• Sites with Monta as the operator now allow adjustments to max charger current.

Improvements

• Renamed Grid and Surplus option in Surplus energy to simply: Default.
• Made it easier to input your address when activating payment.

Fixes

• Failed payment banner removed after successfully adding or updating your payment method.

Improvements

• Renamed Grid and Surplus option in Surplus energy to simply: Default.
• No longer need to fill in customer phone number or name when creating sites.

IMPROVED

• Improved connectivity to 4G mobile networks.

New

• Show Amp Firmware version in About Equalizer page when Equalizer is connected to an Amp.

Improvements

• Minor improvements to help fill in your address when activating Easee Pay with an invalid address.

Fixes

• Was showing 2 phase diagrams for TN 1-phase sites.

New

• Show Amp Firmware version in About Equalizer page when Equalizer is connected to an Amp, also showing it in the Equalizer overview page.

Improvements

• Improvements to the Equalizer sensor direction page - Toggling sensor directions should be easier now.

Fixes

• Was showing 2 phase diagrams for TN 1-phase sites.

• Surplus charging is now supported when connected to an Equalizer with version 119.
• The current sensor direction can be changed from the installer app, requires Installer App version 1.7.3.

Improvements

• Making Surplus Charging page a bit clearer for Equalizers.

Fixes

• Fixed an issue where you would get a black screen when removing yourself from a site from the site backdrop page.

New

• You can now adjust sensor directions for Amps connected to Equalizers.

Improvements

• Making Surplus Charging page a bit clearer for Equalizers.
• Jump into adding backplates after you create a new circuit for an existing site.

- Equalizer HAN now supports Kamstrup HAN meters with P1 adapters (for Austria).

- Optimised telemetry data.

- Improved support for Equalizer AMP.

New

• You can now choose to export a consumption report as a PDF, CSV or XLSX (Defaults to PDF).

Improvements

• Show banner in the Payment page when a payment method has expired or is about to expire.

Fixes

• Adding an Easee Key during an Add Payment Method for Easee Pay should now update the UI correctly.
• Better card expiration validation when adding a card for Easee Pay.

New

• What's new button added to Support page, to easily open release notes.

Improvements

• Rearrange support page items, Troubleshooting/Help is now at the top.
• Adjusted error displayed if you try and add a charger using a serial and pin, when the charger has not been configured or come online yet.

Fixes

• You can now open Site Settings even if you only have an Equalizer (and no chargers).

New

• What's new button added to Support page, to easily open release notes.
• Improved Diagnostic Tests for Chargers, that display more information, and can also show if multiple failures occur at the same time when running tests.

Improvements

• Rearrange support page items, Troubleshooting/Help is now at the top.
• Cosmetic changes to what some buttons look like when they are disabled.
• Moved step counter above header for some flow pages.
• Split up the site create page, you now fill in optional customer info, and select site type in separate pages instead of all in 1 page.

New:

• When using authentication (RFID, app or 3rd party solution) to start and stop charging, the charger will now unlock the cable automatically when charging is stopped by the user
• For operators: Added command to remotely unlock cable
• For operators: Added new operations modes (Waiting for authorisation, deauthorisation) 

Improved:

• Improved monitoring and reporting of charger condition when switching between phase-configuration

New

• Show product type in About Charger page.
• New Troubleshooting/Help function available in the Support Page.

Improvements

• Adjustments to some dark panels for section groupings and some buttons.

Fixes

• Touching a bar in the Consumption chart, when you have Price mode enabled now shows the actual price instead of just 0.00.

New

• Show product type in About Charger page.
• New Troubleshooting/Help function available in the Support Page.

Improvements

• Adjustments to some dark panels for section groupings and some buttons.

New

• You can now setup your Equalizer without requring an existing charge site with chargers in the app.
• You can now manage your access to sites, and manage access of other site members (depending on your role).

Improvements

• Equalizer bootup wait time increased to 120 seconds when setting up new Equalizers.

Fixes

• RFID access on charger card now showing correctly for chargers linked to the site's access level.
• Was using the wrong feedback section colour, it now matches the Charging restriction status colour in the Available Energy page.

Improvements

• Equalizer bootup wait time increased to 120 seconds when setting up new Equalizers.
• Reminder that the Equalizer needs a firmware update when setting it up with Easee Amps - When the Equalizer's firmware is older than v115.

Improvements

• Better error message displayed in some scenarios where the Cloud prevents users from adding a charger to app using a serial number and pin code. When this happens, let a site administrator know, they'll be able to add you using the Easee Portal. The ability to add users to a charging site using the App will come out in an upcoming release.
• Using comma/dot separator for more decimal values based on the User Interface language.

Fixes

• Fixed up some errors relating to opening Support articles in other languages than English.
• Consumption where 2 keys were used on the same day or month with Easee Key filtering enabled should now show correctly.

New

• Call support function now available for our installers in France.

Fixes

• Improvements to backplate programming issues on some specific devices.
• Fixed up some errors relating to opening Support articles in other languages than English.

New

• Show which key was used with Easee Key Filtering enabled in Consumption tables, not just on the Bar Charts.

Improvements

• New style for Lifetime consumption counter in Charger Consumption page and About Equalizer page.

Fixes

• Toggling Subscriptions in Profile should now work correctly.
• Fixed minor theming issues in the new Site consumption page.

Improvements

• Minor adjustments to create site onboarding for new installers.

Fixes

• Toggling Subscriptions in Profile should now work correctly.

Beta for Solar/Surplus charging

New beta feature enabling charging your car with own produced energy

In the Easee app you can now select between two modes:
- Solar -  Will charge your car using only surplus energy
- Grid + Solar - Will use energy from grid and surplus energy

Requirements

• Equalizer firmware 117 or higher
• Easee is the operator om the site
• Registered export of at least 25kWh on the site 
• TN-grid 1 or 3 phase
• IT-grid only 1 phase

Not supported:
- Solar charging on 3-phase IT-grids
- Solar charging with Micromatic/Janitza modbus meters
- Solar charging with Easee Equalizer AMP (will come as an update later on)

Fix for Kamstrup HAN meters with Embriq interface

New

• Have multiple chargers at your charge site? Site consumption now available for site owners/administrators.
• You can now search for support articles in the support page accessible via the Hamburger button in the top left of the app's main page.

New

• You can now search for support articles in the support page accessible via the Hamburger button in the top left of the app's main page.

Improvements

• Charger product card in Backplate details page and Equalizer product card in Equalizer details page slightly smaller when compact leaving more room for important installer functions.
• Phase diagrams on product cards shown by default.

Improvements

• Snackbar notices now shown with a new background colour.

Fixes

• Loading indicator would spin forever when changing the Equalizer's wifi network, rebooting it, changing the main fuse limit or the max allocated current (eMobility fuse), or when upgrading firmware.
• Loading indicator would spin forever when rebooting a charger, or upgrading the firmware.
• Removing yourself from charge sites would sometimes fail.

Improvements

• Snackbar notices now shown with a new background colour.

Fixes

• Loading indicator would spin forever when changing the Equalizer's wifi network, rebooting it, or changing the main fuse protection limit.
• Loading indicator would spin forever when rebooting a charger.
• Charging at 100% when the charger thinks its limited by the charger's max current limit would show up as a charging restriction in yellow, thats now fixed.

Improvements

• Charger/Equalizer help page via info button in product card now aligns properly with the product card.

Fixes

• Delayed start schedules would not take effect without an end time - Now works without end time.

New

• Easee Key filtering for Charger sessions page.

Fixes

• Changing the WiFi credentials for a charger will no longer spin forever.
• Not able to set Equalizer Transformer Ratio to 1:1
• More reliable Offline detection for Chargers and Equalizers.

Fixes

• Changing the WiFi credentials for a charger will no longer spin forever.
• Not able to set Equalizer Transformer Ratio to 1:1
• Configuration of brand new backplates would cause the app to get stuck for certain devices.

Added Initial support for the Easee Equalizer Amp 

Enabling load balancing without the need of a smart meter

What is Easee Equalizer Amp:

The Easee Equalizer Amp is a measurement device and an
accessory for the Easee Equalizer. This device provides the
data necessary for the Equalizer to balance the energy
between your building and the Charging Robot(s).
Avoid unnecessary investments in expensive smart meters
and install within minutes with our Plug & Play system.

This version is only available for Android - It fixes an issue with crashes on some android devices.

Fixes

• Fix to app crashing at startup for some phones running Android.

This version is only available for Android - It fixes an issue with crashes on some android devices.

Fixes

• Fix to app crashing at startup for some phones running Android.

Improvements

• Performance enhancements and updates.
• Adjusted warning messages for Critical Faults with chargers to make it clearer what to do in these situations (Chargers with welded relays). New Contact Support button should this error occur.
• Delayed start schedules will now repeat.

Fixes

• Delayed start schedules will now remember the stop time should you want to add it.

Improvements

• Performance enhancements and updates.
• Adjusted warning messages for Critical Faults with chargers to make it clearer what to do in these situations (Chargers with welded relays). New Contact Support button should this error occur.

New

• Charger access levels matching ones set in the Portal (There's 3 different access leve modes instead of just 2).

Improvements

• More efficient download of charging session logs.
• New Override Schedule Confirmation Page shown when black start button pressed.

New

• You can now setup Sites on behalf of your Installer Company (assuming you have such a thing).

New

• You can now add an optional stop time to Delayed start schedules should you want to.

Improvements

• Adjusted confirmation dialogue messaging when removing an Easee Key from your account.
• Don't show Unable to reach charger in Charger Product card when a charger status is missing.
• Minor adjustments to fonts and styling in some screens.
• Adjusted warning messages for Critical Faults with chargers to make it clearer what to do in these situations (Chargers with welded relays).
• Don't offer 0A as an option when changing the max charger current.

New

• Members of installer companies with the appropriate roles can now make changes to sites belonging to said installer company.

Improvements

• Don't show Unable to reach charger in Charger Product card when a charger status is missing.
• Minor adjustments to fonts and styling in some screens.
• Adjusted warning messages for Critical Faults with chargers to make it clearer what to do in these situations (Chargers with welded relays).
• Don't offer 0A as an option when changing the max charger current.

Fixes

• Splash page (App startup page), and Update Existing Sites pages could during some cloud outtages result in the app getting stuck trying to load.

Improvements

• Better warnings relating to chargers not being able to correctly identify the grid type due to electrical connection issues.
• Cosmetic adjustments

Fixes

• Max charger current should page should not let you select values higher than 32 or circuit fuse value.

Improvements

• Adding a bit more information after a transfer of site ownership request is initiated. To help installers understand what the receving user should expect to receive.
• Better warnings relating to chargers not being able to correctly identify the grid type due to electrical connection issues.

Fixes

• Max charger current setting should not show values higher than 32A or circuit rated current.
• After a site and circuit has been uploaded to cloud, pushing the Transfer ownership button there should open the Transfer Ownership pages, not pop back to Site overview.
• Installers with access to sites through company roles, should not be allowed to remove access from the site.

New

• Shows a set charging price button in Charger consumption, when consumption is detected, but cost is 0.
• Feedback now possible for the Available Energy page, if a particular message is crystal clear or confusing, you can give us a thumbs up or down.

Improvements

• Charger/Equalizer serial number replaces the name when viewing the phase diagram (When you tap the product image).
• New Critical fault warning for faults with the Charger that might require RMA - Contact Support if you should be unlucky enough to encounter it.

Fixes

• Remove QR code from Charger Help page (You were not supposed to see that. yet...)
• Weekly charge schedule limit would sometimes not let you set it to 100% - Caused by a max charger current being lower than the charging current.
• Weekly charge schedule limit badge would split across 2 lines for verbose languages.

New

• Call support button in Support page for Belgium routes to Belgian number instead of Dutch one.

Improvements

• New Critical fault warning for faults with the Charger that might require RMA - Contact Support if you should be unlucky enough to encounter it.
• Making it more obvious that you have pending configuration changes requiring an upload to the cloud to take effect.
• Improved progress whilst programming Equalizers using NFC (for some devices).

Fixes

• Made sure special characters in charge site addresses don't cause the charger to remain unconfigured after backplate NFC configuration.

New:

• Support for encrypted HAN, which enables Danish HAN meter connectivity
• Support for danish HAN message structure
• Preliminary support for Eastron SDM120(CTM)

Fixed:

• Fix accumulated energy decoding for Swedish P1 meters
• Fix for Kamstrup 685-* ARON / IT CT-connected meters
• Fixed corrupted timestamps on OTA commands
• Fix for Modbus errors on P1 Equalizer
• Fix for violation on interframe gaps on Modbus
• Fix for current directions on Aidon P1 meters with PV
• Fix for non-standards compliant Star STZ 351 P1 meters (edited)

Improved:

• Made P1 parser more robust
• Improvements to HAN solar current direction detection
• Workaround for accumulated energy being off by x10 on some Swedish Aidon HAN meters

New

• Normal users in Easee Home sites can now start charging using the app, not just with an Easee Key. (Depends on the site operator settings.)

Fixes

• Upcoming charge time displayed in Charger Product Card for weekly schedules was off by an hour in some cases.

Improvements

• Improved progress whilst programming or wiping backplate tags (for Android).

Fixes

• Select meter type in Equalizer Overview page would freeze for some firmware versions of the Equalizer.

New

• Polish Language Support.

Improvements

• Workaround to avoid Equalizer showing up as Offline when its not actually Offline.
• Show Ground Fault information on the Charger Product card when there's a ground fault detected between the car and the charger.
• Ongoing sessions in Charging Session Log should not draw a line down to zero at the end of the axis.
• First time hint that shows up the first time you need to Approve a charging session, to make it clearer that users should press the fingerprint button to approve to start charging, instead of toggling the access level (which will mess up with proper session tracking).

Fixes

• Adjustments to Week plan overlap corrections for some scenarios.
• Some adjustments to consumption charts to avoid some glitchy animations when you filter by Easee Keys.
• Week plan times not showing on product card for some weekly schedules where the same times spanned across multiple days.

New

• Polish Language Support.

Improvements

• Minor adjustments to the Upload to cloud page when an error occurs.
• Workaround to avoid Equalizer showing up as Offline when its not actually Offline.
• Show Ground Fault information on the Charger Product card when there's a ground fault detected between the car and the charger.
• Add upload to cloud button to Circuit completed page, to make it clearer that its important to Upload to Cloud for things to show up correctly in the Portal.
• Show warning if you try and create a circuit with a fuse rating that exceeds the site's rated current.

Fixes

• Should now be able to use the currently connected WiFi network on your device, to fill in the network name, should you need to.
• Handle Equalizers with empty modbus configurations, which would sometimes result in the Site overview page crashing.

New

• Support for Equalizers with HAN encrypted meters.

Improvements

• Open Charging currents settings page with Fallback currents visible when navigated to from Available Energy with Offline Settings charging restriction.
• Use 6 digit OTP codes instead of 4 digit when verifying account phone numbers.
• Lots of cosmetic fixes regarding notched devices and landscape mode.

Fixes

• Charger consumption charts looked a bit funky with an ongoing charging session.
• Logging in using only an email address when phone number verification is required now works.
• Charging session log x-axis not displayed correctly for some charging sessions.

New

• Support for Equalizers with HAN encrypted meters.
• You can fill in your phone's connected WiFi network name, scan for nearby networks using your phone (on Android only) or scan using chargers when filling in WiFi credentials for backplates and Equalizers.
• New Lookup charger functionality in Tools - to help you lookup the charger using the Chargeberry QR code. We will continue to improve the behaviour in Android going forward.
• Call support button in Support page for Germany, Austria, Switzerland, Norway, Denmark, Sweden, Iceland and Finland (Netherlands was added in previous versions)

Improvements

• Open Charging currents settings page with Fallback currents visible when navigated to from Available Energy with Offline Settings charging restriction.
• Use 6 digit OTP codes instead of 4 digit when verifying account phone numbers.
• Lots of cosmetic fixes regarding notched devices and landscape mode.
• Better backplate programming animations for Android.
  
• Backplate and Equalizer NFC scanner sheet automatically opens after you've programmed your first Equalizer/Backplate.
• Reuse circuit WiFi moved to new Select WiFi functionality (only for subsequent circuits).

Fixes

• Logging in using only an email address when phone number verification is required now works.
• Links in backplate NFC tags will no longer interfere when configuring backplates after a WiFi QR code has been scanned in Android.
• Multiple operator roles for the same operator now handled correctly.
• Backplate programming should now work correctly even for longer addresses and longer names with characters containing umlauts and similar symbols.

Easee Home / Charge Release V301:

New:

• Cable-lock release at power-off as default for new chargers. Will soon be added as a choice to all chargers in app, to choose that the charger should open the cable-lock in the event of a power failure.
• Fatal Error - Added fatal error if the selftest of relays introduced with 300 are not OK. Charger will go in error mode forever
  

Fix:

• Put back the device event “forgot to authorize charging”
• Reduce break-in time in cable-lock selftest to avoid cable-lock induced self-test timeouts

New

• Ability to set the Current Transformer Ratio for Equalizers that require it.

Improvements

• Equalizer LED lights help page is now accessible when you have trouble setting up an Equalizer.

Fixes

• Company roles should override Site roles when appropriate.
• Devices running Polish as the OS language would get a pretty stark user interface - Should not auto select languages that have not been translated fully yet - We are still working on Polish translations.

Improvements

• Cosmetic fixes to Charging current page for sites without Equalizers.
• Equalizer LED lights help page is now accessible when you have trouble setting up an Equalizer.
• Cosmetic adjustments to consumption charts, specifically the tool tips were a bit off.

Fixes

• Devices running Polish as the OS language would get a pretty stark user interface - Should not auto select languages that have not been translated fully yet - We are still working on Polish translations.

New

• Shows how much power is exported to the grid in the Equalizer Product card (displayed depending on meter type and some other factors.)
• Ability to set the Current Transformer Ratio for Equalizers that require it.

Improvements

• Cosmetic adjustments and improved design for the Charger Consumption Page.
• Adjusted wording in some of the more verbose languages to reduce text overflows.
• Adjusted app bar styling for some bottom sheets.
• Removing a product from the app is now slightly less intimidating, you can always add them back in if you want to.
• Styling of Equalizer power indicators now slightly nicer and cleaner.
• Cable Locking page adjusted slightly.

Fixes

• Charging session log now showing in local time, which lets be honest is a bit more useful than showing it in universal coordinated time.
• Fixed alignment issues with charger consumption bar chart axis labels.
• Legacy Delayed Start schedules that still have the ability to toggle repeat daily now has a switch that you can actually see.

Improvements

• Slight adjustments to texts displayed when configuring backplates.
• Show Meter name instead of unhelpful number in Equalizer Overview Page.

Fixes

• Country was not prefilled when creating Sites if you logged in using your email address instead of phone number.
• Would sometimes get stuck when trying to change meter type for Equalizers.

New

• Charging session log - You can now check the power fluctuations that occurred during your charging sessions to see charge power over time.

Improvements

• Some adjustments to ensure that you receive all communication in the language set in the app.
• Added explanation to the restrictions section in the Available Energy page.
• Updating your profile is now slightly more efficient.
• Easeefied icons for the Support button in Login and Hamburger Menu pages, as well as the Language button in the Login page.

Fixes

• Dragging sheets by their app bar no longer pop back to where they were when you let go.
• Text in the list items in the Schedule list no longer overflow in more verbose languages.
• No longer shows an error when you try to reset your forgotten password.
• Slightly better at automatically detecting what country code to use when you login for the first time.
• Push notifications working again on Android 13

New

• System status issues now shown on the main page.

Improvements

• You can now select modbus meter types like WAGO 879-30X0, Schneider PM3250 and Carlo Gavazzi EMXXX for Equalizers (v107 or higher needed.). Going forward, new modbus types supported by Equalizers will be added without an app update.
• New animations to primary action button in the various NFC scanner pages (for example Add new backplate, or Check backplate in Tools) to make it a bit more clear that you have to click the button before you can start programming backplate tags.
• Easeefied icons for the Support button in Login and Hamburger Menu pages, as well as the Language button in the Login page.
• Some adjustments to ensure that you receive all communication in the language set in the app.
• Updating your profile is now slightly more efficient.

Fixes

• Very long circuit names caused the Circuit Overview page to look a bit strange.
• Very long backplate names would similarly make things look weird in the Backplate Overview page.
• No longer shows an error when you try to reset your forgotten password.
• Slightly better at automatically detecting what country code to use when you login for the first time.
• Dragging sheets by their app bar no longer pop back to where they were when you let go.

Improvements

• Performance improvements
• New hamburger menu page style with icons.
• Moved notification settings found in the hamburger menu page and moved it into the Preferences page.
• Moved logout button into the Profile page.

Fixes

• Push notifications should work again now.

New

• You can now filter your charger consumption based on which Easee Key you used to start charging. Please note we don't include using the App to authenticate yet, but will do so in a future update.
• You can now filter your charger consumption reports based on which Easee Key you used to start charging. Please note we don't include using the App to authenticate yet, but will do so in a future update.
• You are able to change the max charger current in Charger settings based on your permissions and which operator you have for your charging site.

Improvements

• Changing Charger Access Level (Open/Restricted) is now done in a separate subpage instead of toggling directly in the product card.
• UK Offpeak charging listed as a partner feature in the partner settings page.
• New icon for UK Offpeak charging to distinguish it from Smart charging.
• UK Offpeak Charging Details now shows peak hours in 24h notation instead of AM/PM.
• Made the real charge duration more accurate based on information from our cloud when viewing charging sessions.
• Consolidated all information banners used across the app.
• Faster, better, stronger and obviously more beautiful.

Fixes

• Schedule button on product card should no longer overflow for smaller screens.
• Fixed overflow issue in week plan overview when in landscape mode.
• Adjusted information displayed in the popover when tapping a week plan overview day - Its now more inline with what you see in the week plan editor.
• Number of Easee Keys shown in the Hamburger menu is now correctly updated when adding or removing Easee Keys.

New

• Ever get bothered by notifications for charging on a site you installed? Now you can remove yourself from the Site after you've finished setting things up. This can be done in the Site overview page by clicking the 3 dots and selecting Leave Site.
• You can pull to refresh direct from the Site overview, meaning you no longer need to exit, and open the page again.
• New Recent section shown in the Update Existing Sites list, this is kept to 3 sites for now, and updates whenever you make a change to a site. This will make it easier to find recent sites when re-entering the app.
• We've made it easier to know when new Chargers/Equalizers come online. You can refresh by pulling down in the Site overview page, if any new Chargers/Equalizers have been detected, you will be made aware of that by way of a snackbar message.

Improvements

• Changed the check backplate button icon in Tools from an arrow to something more appropraite.
• Show warning / info if you have chosen to apply UK regulations in the select operator page when creating new sites.
• Site structure in site overview is now open by default unless you have some pending changes that can be uploaded to the Cloud.
• Faster, better, stronger and obviously more beautiful.

Fixes

• Company roles now included when checking for your permission to make modifications to sites. That means if you have an appropriate company role and that company is linked to the site, you should be able to make changes to the site using the app without having to give yourself a specific site role.
• Some circuits created in the portal would result in incorrect circuit ids, causing the installer app to crash.

IMPROVED
- Improved RCD/welded relays checker, performing RCD selftest and check for welded relays at boot, every 24h and after charging.
- Improved security for local wifi Interface

NEW
- OCPP freeChargingKey now works offline (requires OCPP Version 1.5.6 (Release-128 and newer))

New

• Offpeak charging to conform with the Electric Vehicles (Smart Charge Points) Regulations (UK Only).

Improvements

• Removed red accents for buttons with red charger cover colours, due to ambiguity with errors.
• Adjusted wording for pen faults to incoming supply issue, due to them not necessarily being only pen faults (UK Only).
• Minor adjustments to some error states for Charge Sessions.

Fixes

• Adjustments to time pickers to avoid empty hours/minutes for certain scenarios in the Week Plan Schedule page.

New

• Offpeak charging to conform with the Electric Vehicles (Smart Charge Points) Regulations (UK Only).

Improvements

• Adjusted wording for pen faults to incoming supply issue, due to them not necessarily being only pen faults (UK Only).

Easee One V47 - 21.06.22

Improve
Auto-lock cable 5 seconds after detecting EV
Configure Overtemperature shutdown
Open cablelock at powerloss if enabled.
Use 15% limit if GND is connected to T1, else 10% as before. [Pen]
Runs weld detection when car is finished charging and remembers it.[Pen]
Retrying enabling PEN relay i PEN relay stuck (edited)

Fix
Set default language to english, effectively removing language choice from local wifi interface to fix issues with being stuck on language page
Fix missing break [cablelock]

New

• Support for new Modbus meters:

- WAGO 879-30X0

- Schneider PM3250

- Carlo Gavazzi EM1XX, EM2XX and EM3XX series

Fixes

• Fix for P1 header decoder to support more meters
• Fixes incompatibilities with P1 and Swedish meters
• Fixes incompatibility with some DSMR v2 meters, and some Aidon 6534 P1 meters

Improved

• Support for HAN-type data on the P1 interface.

New

• You can now set a charging intensity for different charging periods in your Week plan - This enables you to have increased/decreased power during specific hours of the day.

Improvements

• Subtle hint the first time you have a available energy limitation whilst charging (for the lightning icon).
• Adjustments to iconography - Easeefication

Fixes

• Changes to charger access level on other devices now reloads in real time on charger product card.
• Week plan time selection improvements to avoid overlaps.
• Charging Price shown in Site Settings and in Charging sessions now, we now show the including VAT price / cost in both pages.
• Slight adjustment to definition of end of month so that some end of month sessions are included in the charging consumption reports.
• WiFi credentials should allow for network names that include '.' or '-'.

Release notes V298:

Bugfix:
Authorization through OCPP – Bugfix for authorization/deauthorization (Start/Stop/Start) during a charging session, did not result in a StartTransaction command through OCPP.

Improvmentes:
Improved the logic for the internal clock in the charger. Used for scheduling e.g.
Improved charging session reporting to cloud.

Fixes

• WiFi credentials should allow for network names that include '.' or '-'.

Improvements

• Minor styling adjustments to available energy restrictions to make it slightly easier to understand.
• Clicking the Open Settings button when the charger is limited by charger settings / offline charger settings will now take directly to the relevant setting page.
• No need for a Read more button to expand for more info on the primary restriction for available energy - Just show the info, we have plenty of room.
• Adjusted the weekly schedule picker in the app to make it less likely for overlaps to occur.

Fixes

• WiFi credentials input now with a max length check to make sure you cannot enter network names and passwords that are longer than the products allow.
• WiFi credentials input checked for invalid symbols like -./
• Better caching of active countries to ensure the app will allow login/registration for newly activated countries.
• Adjusted some of the labels on the Consumption chart axes to avoid overlap.

Improvements

• Minor styling adjustments to available energy restrictions to make it slightly easier to understand.
• Clicking the Open Settings button when the charger is limited by charger settings / offline charger settings will now take directly to the relevant setting page.
• No need for a Read more button to expand for more info on the primary restriction for available energy - Just show the info, we have plenty of room.
• Adjusted the weekly schedule picker in the app to make it less likely for overlaps to occur.

Fixes

• Adjusted some of the labels on the Consumption chart axes to avoid overlap.
• Circuit fuse should now show up in the available energy page, restrictions section.

Improvements

• Better charging site creation flow to make Site Operator selection a bit clearer.
• Moved Tools button from the hamburger menu into the main page.
• Simple progress indication when programming or erasing backplates.
• Better app bar title for sites with no name.

Fixes

• WiFi credentials input now with a max length check to make sure you cannot enter network names and passwords that are longer than the products allow.
• WiFi credentials input checked for invalid symbols like -./
• Fixed a bug where returning to a charging site at a later stage and programming backplates, the WiFi credentials would only be stored in the master charger, not the secondaries.
• Better caching of active countries to ensure the app will allow login/registration for newly activated countries.

New

• List out restrictions and limitations for available energy whilst charging by tapping the lightning icon on the charger product card. (Charger Firmware v296 required for it to work).
• You can now delete your account should you want to.
• You can lookup a site by Site Key via the overflow button at the top of the Update Existing Sites page.
• You are now allowed to delete backplates that have chargers on them (provided you have access to the charging site of course). This should make it easier to move a backplate to another circuit should you need to if you've made a mistake.

Improvements

• Cosmetic adjustments for bottom sheets in landscape mode.
• Now using the new operators endpoint to download lists of operators, to avoid being able to set installer companies as operators of sites.
• Made PEN fault detection messaging a bit clearer.
• Site overview sections collapsed by default.
• Adds the name of the site (or the address if no site name) to the top of the screen in both site overview and circuit overview pages.
• Moved Ongoing sites into update existing site as a section.

Fixes

• Position names would sometimes disappear or be replaced with charger names in the Circuit overview page.

New

• Why is current limited? Ever wonder why the charging rate is lower than you'd expect? If you tap the lightning icon on the charger product card it will now tell you the primary limitation (if there is one), plus a list of other possible restrictions that might affect charging. Charger Firmware v296 required for it to work.

Fixes

• Improved the loading of sessions data, to avoid duplicate sessions in the Charging sessions page.

New

• Easily add back products back to the app if you've removed them - Making it easier to add products to the app that you have access to already.
• Weekly schedule Overview - Making it easier to see the schedules you've made.
• You can now delete your account should you want to.

Improvements

• You can now authorize charging via the app for sites with non-Easee operators that allow RFID keys.
• Cosmetic adjustments for bottom sheets in landscape mode.
• Now using the new operators endpoint to download lists of operators, to avoid being able to set installer companies as operators of sites.
• Improvements for sites with HomeCharge as the site operator.
• Erratic EV push notification setting now generalised as Interrupted charging.
• Made PEN fault detection messaging a bit clearer.

Fixes

• Sessions without a start or end time will no longer prevent the charging sessions page from loading.
• You can now add an address to charging sites without an address.

New:
* Device events – Add support for device events, which are configurable device messages.
* Added reasons for limited current - Added support for new feature coming into the app. Will show the end customer what reduces the charging current.

Improved:
* Rfid-scan: send RFID-tag when in state AUTH_STATE_READY if authorization is enabled.
* Bug fix for dynamic charge current - Frequent change of dynamic charge current did not result in the same output current.
* Improved charging schedule - Improved logic for the charger to receive and send schedule to the cloud. Transition towards supporting OCPP 1.6 SmartCharging.

New

• Static load balancing

Fixes

• Workaround for non-compliant P1 meters (FLU - Shandong Feilong Instrument)
• Support 3-phase meters to be used as 1-phase meters on HAN
• Fix for Equalizer allocating more current than the fuse size, for multiple circuits

New

• Use phone's timezone when generating consumption reports for chargers instead of UTC.

Improvements

• New Easee Key Icons (Actually keys now, instead of RFID tags).
• "Add" action bar button in Product / Easee Key page now replaced with + icon.
• Open/RFID Access for Chargers can now be adjusted for sites with site operators that support it.
• Minor adjustments to navigation bar paddings.

Fixes

• Logging in with just email and not phone number first would sometimes result in having to re-enter credentials when starting the app.
• Now showing the correct status bar icon colour more reliably in the splash page.

New

• Help page via Info button in Backplate Overview pages without Chargeberries.
• You can now select "Static" as an Equalizer Device mode via the Meter type page in the Equalizer Overview page.

Improvements

• Open/RFID Access for Chargers can now be adjusted for the site operators that support it.
• Adjustments to some button icons (Firmware update icon and Update existing site icon).

Fixes

• No longer showing misleading WiFi connection button in Circuit overview page when updating existing circuits. You are now prompted to fill in the wifi credentials when adding backplates instead.
• Logging in with just email and not phone number first would sometimes result in having to re-enter credentials when starting the app.

New

• We now show the Searching for Master status, for secondary chargers that are unable to locate the master Charge Robot.

Improvements

• Better explanation for 403 / No access errors for Chargers and Equalizers.
• Adjustments to cater for dynamic font sizes for some phones.
• Minor adjustments to the Equalizer Wizard Placement Inside video.
• Cleaned up charger product card help page Light statuses section.

Fixes

• When you try to delete a delayed start schedule that's disabled it should finally disappear.
• No longer truncating the info banner messages in the charger / equalizer product card help pages.
• Time pickers inside of bottom sheets now less likely to close the sheet when you want to scroll the list.
• Week plans with ranges that have 5 minutes past the hour should be interpreted as such, i.e. 5 minutes past the hour is not equal to 50 minutes past the hour.

New

• New CT Config Observation
  • Includes Primary and Secondary values for the CT
  • New parameter that signals if the meter connected is a CT meter, but no CT config has been set
    

Fixed

• Ignore duplicate masters in the multiple circuit load balancing configuration
  
• Fixed reconnect step-off when there is connection setup issues late in the connection process.

Improved

• Changed ConfigureCurrentTransformer Command semantics. Sending a command with Primary=0 and Secondary=0, will now erase the CT settings
• Removed iPerf test server
• Added support for new Kamstrup 686 dataformat. (Fixes wrong fase and grid type on Kamstrup singlephase meters)

New

• You can now clear away unsynced changes from the Ongoing sites page.
• Upgrading Equalizer Firmware now possible in the Equalizer Overview Page (Button only visible when there's a new firmware version available).
• Upgrading Charging Robot Firmware now possible in the Backplate Overview Page (Button only visible when there's a new firmware version available).
• You can now access the Equalizer product card from the Users app, directly from the Equalizer Overview Page. Enabling you to see and change the same information and settings as your customers.
• You can now access the Charging Robot product card from the Users app, directly from the Backplate Overview Page. Enabling you to see and change the same information and settings as your customers.

Improvements

• Backplate overview page now hinting at the fact that a charger section will be unlocked once a charger is detected by the Cloud.
• Delete button in the Delete site page now has a bit of padding to make it look a bit nicer.
• You should be able to create sites with a main fuse higher than 500A, this also means you can update a site's main fuse to something higher than 500A (New Limit is 9999A)
• Equalizer Main Fuse Protection Limit now removed from the Equalizer overview page, since its now accessible via Equalizer Settings in the Product Card.
• Cosmetic adjustments to the Equalizer meter type page.

Fixes

• Checkmark style in signup page adjusted so you can actually see it when its not checked, which is useful lets be honest, making it easier to see what needs checking off to create an account.

New

• You can now export a PDF report for your charger's consumption.

Improvements

• Styling adjustments to the Add Product user experience.
• Site Settings / Operator page when you haven't got an operator a bit nicer looking.
• Confirmation dialog added to the On/Off toggle in Charger settings to make it a bit more understandable.
• Some adjustments to text sizes for devices with text scaling enabled.

Fixes

• No longer showing NOK (kr) in Consumption page when there's no consumption
• No longer falling back on NOK (kr) as a default currency in the Consumption page.
• Pull to refresh in the Consumption page now works correctly.
• Charger consumption page totals should be a bit more reliable now.

New

• Finnish language support.
• Howto find serial and pin link added to Support pages.
• Site owners can now change site operator from the Easee app (in site settings).
• Moving ? You can now transfer the site to a new owner (in site settings).

Improvements

• Charging wave page in Charger settings renamed to Charging wave (App) to clarify that its the charging wave animation thats displayed in the App only, and not related to the Charger LED.
• Easee Keys section user interface cleaned up and modernised.
• New account creation pages (signup) with visual overhaul.
• New login page.
• New forgot password page.
• Styling adjustments to most buttons, and standardisation of user interface elements (buttons, padding, fonts).

Christmas Edition - Happy Holidays everyone ! :D

New

• Display Equalizer firmware version in the Equalizer overview page.
• Finnish language support.
• Run Self test hardware diagnostic on chargeberries via the Chargeberry section of the Backplate overview page (only visible when a backplate has an attached Chargeberry).

Improvements

• Changes to e-mobility fuse and main fuse protection limits in the portal and on other devices now reloads the Equalizer overview page in real-time.
• Some improvements to the buttons and icons in the WiFi setup pages.
• New account creation pages (signup) with visual overhaul.
• New login page.
• New forgot password page.
• Styling adjustments to most buttons, and standardisation of user interface elements (buttons, padding, fonts).

Fixes

• Ongoing sites button in the main page of the app now a bit more resilient on smaller screen sizes and in verbose languages.

Christmas Edition - Happy Holidays everyone ! :D

Improvements:

• Improved charging-stop speed when EV is no longer requesting power.
• Improved charging schedule saving and reading to be more reliable.
  

New:

• Added logic to ensure unique sequence ID's for all charging sessions.
• Added reporting of which RFID Tag used when authorizing charging with locally saved Easee Key
  
  

• Bug fix for permanent cable lock

New & Improved

• Charge Session Tracking Service
  
  

Please be aware we have released a new Charge Session Tracking Service 30.11.2021 - all in our effort to improve stability of our systems.

NOTE! There might be some changes in sessions included in reports taken out now vs prior to 01.12.21

For example: For a periodic report ranging from 01.10.21-31.10.21, if there is a session which started on 31.10.21 and ended on 01.11.21, this session would previously be included in the periodic report (due to the sessions end date), whereas now it will be included in reports ranging from 01.11 (i.e the sessions end date)

Improved

• Improved security logic for WIFI interface

New

• New IOTSystem configuration for selecting cloud platforms, will fall back to the other cloud system if it is unable to connect for some time.

• New meterless (static) load balancing

• Brings Justice to the Equalizer - Equalizer can now connect to both Home & Charge facilities on both UDP and RF.

• Support for Aidon 6540

• Support for Kamstrup 685-11-23

• Support for Eastron SDM72/630 Modbus meters

• Added Equalized charge current telemetry

• Added max allocated current setting

• Added modified flag to load balancing children-report if the config is not activated

Fixed

• Stop allocating power to timed out children in load balancing

• Fix ICC Tx Seqnr issue, that would cause a dropped packet when the session id was changed

Improved

• Freed up memory by reducing task stack sizes
  

• Cache the type of charge facility the Equalizer is connected to make reconnections faster on RF after reboot

• Minor power optimizations

• Removed 'UTC' indicator from the clock in meter telemetry

• Guestimate current direction when Kamstrup/Kaifa meter are exporting power (Solar installations) (Only works for 3-Phase TN and 1-Phase IT/TN) Enabled after 500Ws of exported power detected.

New

• Equalizer Main Fuse Limits can now be modified in the Equalizer overview page.
• Main Fuse can now be modified for existing sites.
• Eastron SDM meters now supported (Equalizer with Firmware version 95 or higher required).

Fixes

• Transfer ownership will now remove leading zeroes in telephone numbers before transmission to the Cloud.

New

• New Cable stuck animated guide to help you if your cable gets stuck, accessible via Permanent cable lock sheet and via Support page.
• Yearly and monthly consumption, accessible via the Product card.
• You can see a list of all completed charging sessions via the Product card / Charger consumption /Charging sessions.
• Now able to login using your email address (useful if you have more than 1 account with the same telephone number).

Improvements

• Display more than 2 decimals when needed for Site Charging prices.
• Owners of Easee Charge sites should also be able to adjust site name, site charging price, and site power management settings like Charging Currents and Power at all times.
• "To the battery" renamed to just Energy in Ongoing Session / Completed Session sheet.

Fixes

• Normal users on Easee Charge sites should be able to toggle permanent cable lock.

Fixed

• Fixed a bug in the weekly schedule where the start and end time was the same (affected new schedules) 
• Fixed a race condition in the weekly schedule
• Fixed a bug with storing refresh tokens

Improvements

• Easee will now show as the sender of SMS, not just a number

New

• You can input WiFi credentials by scanning Wifi Credential QR Codes, to help with WiFi credential input for backplates and Equalizers.
• Toggle on/off load balancing for sites with Equalizers (in the Equalizer Details Page).
• Max Charger Current can now be configured in the Backplate details page, for backplates with chargeberries attached.

Improvements

• More user friendly error displayed when you open the details of a site via the Ongoing sites / Site Key page when you don't have access to the site.
• Adjusted the text in Circuit / Settings / Charging current to clarify that the parameter affects that specific circuit, not the whole site.

Fixes

• Should be able to read completely blank backplates.
• Backplate NFC operations a lot more robust, so should be easier to read/write/wipe backplates using NFC.
• Prevent setting circuit settings charging current fallback to non-sensical values. (anything below 6 is basically 0 anyway).

Improved:

• Improved FW upgrade for Easee Home and Easee Charge in manufacturing.

Improved:

• Improved logic for locking arm – Added support for new lock sensor type
• Improved WIFI logic for validating the expiration date of certificates
• Improved logic for RFID / Equalizer pairing.

New:

• Added information in Local Wifi interface to inform users that this interface will be removed in the future - WiFi interface will soon be replaced by the Easee App / Installer App to make your life even easier

New

• Cable lock renamed to Permanent cable lock, and moved to a dedicated bottom sheet page, to make it easier to understand. Long press the cable lock product card icon to quickly toggle the lock.

Improvements

• Site charging current fallback limit (Max Offline Circuit Current) can now be changed to 0.
• Adjusted what the charger product card looks like whilst charging, for a cleaner and less cluttered look.
• My Easee Keys renamed to just Easee Keys in hamburger menu.

Fixes

• Week Plan Schedule day selector now working a lot better with different screen sizes, orientations and resolutions.
• Should show TN 3 phase title in Phase diagram on product card for TN 3 Phase grids.

New

• You can now configure max allocated currents / eMobility fuse for Equalizers.
• You can now change a site's address if you have permissions to do so.
• Charging currents (Max Circuit Current) fallbacks can now be set to 0 in Circuit Settings.

Improvements

• Faster, better, stronger.
• Site type description in Site overview and Site create pages displayed as Easee Home / Easee One instead of just Easee Home.

Fixes

• Display the correct Equalizer meter type configuration info based on updated responses from the cloud.
• Should now be able to program Equalizers on Easee Charge sites, sites with multiple circuits or for sites without any backplates.

New

• You can now see more charging session info whilst charging, not just when its finished.
• You can see the address of a site in Site Settings / About.
• You can change or update the address of a site in Site Settings / About.
• You can now open the support page or change language when not logged in.

Improvements

• Banners explaining why you cannot change phase mode or schedules when appropriate.
• Some references to HAN ports in Equalizers adjusted to reflect HAN/P1.
• Cosmetic adjustments to Equalizer product card.

Fixes

• Some weekly schedules would start/stop at the wrong time. You may want to double check and re-save your schedule for it to take effect.
• Forgot password page telling you its sending an SMS, which was wrong, now informing you that it will send an email.
• Some text spacing issues fixed in the Signup page for certain languages.

New

• Show Equalizers + basic Equalizer information in Site Overview.
• Ability to remove Equalizers fr om sites.
• Ability to reboot Equalizer.
• Ability to configure/add an Equalizer to a site.
• Able to configure meter type for an Equalizer (now hooked up to correct API endpoint).
• Real-Time updates when meter type or master backplate id changes for an Equalizer in Equalizer overview page.
• Show charger serial in backplate overview page for backplates with chargers.

Improvements

• Site Operator is no longer a compulsory field when creating new sites.
• Main Fuse now an option for Easee Charge sites.
• Cosmetic tweaks to the Site Overview page.
• Adjusted the backplate programming animation to make it clearer that you need to hold your phone next to backplates for a while to program them successfully.

Fixes

• Added missing text cursor to login, site create and a few other screens.
• Workaround for Backplate not found / Backplate id 000000 on some sites that mostly affected German and UK sites due to post code lengths.

Improvements

• Cosmetic improvements to Circuit data / Circuit fuse / Circuit name pages.

Fixes

• Site Charging current would sometimes show as 0, even when it was not actually set to 0.
• Opening support and system status pages did not open correctly on devices running Android 11 or higher.

Improvements

• Cosmetic adjustments to product card help pages.

Fixes

• Site Charging current would sometimes show as 0, even when it was not actually set to 0.
• Opening support and system status pages did not open correctly on devices running Android 11 or higher.
• Double tapping the product card info icon showed a gray bar on some devices.
• Adds ability to adjust Equalizer main fuse limit in some situations where it couldn't before due to incorrect main fuse value in the Equalizer.
• Update and continue button in Equalizer wizard for unsupported meter types didn't work correctly.

Improved:

Environmental temperature protection mechanism

The charger has a built safety mechanism which will reduce the charging output if the environmental temperature exposure is too high. This protection mechanism has now been further improved and will automatically increase charging output power again if environmental temperature decreases. The protection mechanism will try to maintain a max internal charger temperature of ≤75 degrees celsius by adjusting the charging output power. Such high temperatures may occur if the charger is placed in direct sunlight or if the environmental temperature is very high while charging.

 

New:

Clock synced energy reporting (pending cloud release)
The charger now supports sending energy reports which are clock aligned meaning it can be configured to report energy consumption at an even interval during an hour. This new feature requires a cloud function which is still pending release.

As an example, configuring the energy report for every 15th minute will give energy readings at 00:00:00, 00:15:00, 00:30:00, 00:45:00, 01:00:00 etc...

Fixes

• Fixed issue where it was not possible to upgrade firmware from WiFi interface
• + various fixes and improvements

New

• Weekly Schedules - You can now define multiple charging periods for different days of the week. And easily disable / enable them whenever you want. Old existing schedules have been renamed to "Delayed start" and should continue to function as they always did.

Improvements

• Improved the Max Charging Current / Offline Max Charging Current pages in site settings.
• The correct unit for RSSI Signal Strength is dBm not dB.
• Minor Adjustments to completed charging session sheet.
• Adjustments to Charger/Equalizer WiFi Settings pages.

Fixes

• Programming Equalizers via NFC for Android was not working, it should work now.

New

• Able to change site operator in the Site Overview page.
• Able to change circuit settings for existing sites / circuits with a defined master charger. (Max Charging Current and Power at all times.)
• You can now add wifi-credentials for new backplates in existing circuits, meaning its easier to program new backplates to existing sites/circuits.
• Making it easier to Request access from the site owner when you find backplates for sites you don't have access to.

Improvements

• Knowledge base button removed from the Support page.
• Renamed app to Installer (instead of Installers)

Fixes

• Minor issues related to transfer of ownership fixed (prefilling phone numbers / country codes).

Improvements:

• Improved RFID speed & stability
• Improved handling of WiFi connections with a poor WiFi Signal to try to maintain the connection for a longer time. 
• The offline fallback current is now updated if the charger is configured.
  
• Temperature monitoring is not reported to cloud unless there is an ongoing charging session
  
• Improved logic for firmware update of cellular modem
  
• Charger automatically connects to new cloud system during manufacturing

New

• Show charging session cost for completed charging sessions for sites that have a defined charging price.

Improvements

• Charger Phase Mode text changes and IT power grid disclaimers.
• Knowledge base button removed from the Support page.
• Notification settings now translated.

Fixes

• If a site did not have a charging price defined already, you would be unable to change it. Now you can.

New

Improved FW upgrade for Equalizer manufacturing.

New:

• As a Partner or Site Owner, I can now delete a site in Easee Portal (https://easee.upvoty.com/board...)

Improved:

• Updated design
• Translation updates
  

Fixes

• Backplate configs now contains Site Keys, not Site Ids.

Improvements

• Cosmetic adjustments to action cells in Site overview/Circuit overview/Check backplate result pages.

New

Support for Embriq/Rejlers HAN interface - Used on Landis+Gyr and some Aidon meters.

Fixed

Fixed an issue in a filter that could cause some current measurements to be ignored every 10 minutes.

Improvements:

• Equalizer Wizard, making it easier to configure your new Equalizer using either an existing Charge Robot or your phone.
• Added support for future products. 
• Overcurrent errors in Charge Robots now displayed in the product card.
• Improved generic error message for unhandled Charge Robot errors (Wired incorrectly etc.)
• Cosmetic tweaks to Equalizer Main Fuse Limit page.
• Tweak to "Only RFID key" under access in charger help page.

Improved

• Updated handling of erratic EV protection to retry charging in case EV functions as expected
• Added support for connecting to a new cloud instance
• Updated logic for Equalizer pairing, the charger will now only beep and flash green upon successful pairing
• Improved temperature monitoring algorithms
• Cable will not unlock when charging is paused, cable must be removed from EV for cable to unlock. If the permanent lock is enabled the cable must be unlocked from app as before.

Fixed

• Updated WiFi interface to prompt for additional fuse if fuse is set higher than 80A and the prompt
• Updated logic for DynamicChargerCurrent and MaxChargerCurrent, setting another Dynamic charger current than 0 and 32 will now work. Info: Dynamic charger current will reset to max if the cable is unplugged
• Updated logic for the duration of offline sessions to correct the time when time is synced properly

Improvements:

• Circuit fuse should not be modified unless you are an installer.
• Removed onscreen keyboard in Charging price page, to avoid issues with custom keyboards.

Fixed:

• Saving a schedule didn't take effect, works again now.
  

NOTE: If you created or updated a schedule using v.1.2.1 of the app, you will need to confirm the schedule with this version of the appfor the schedule to take effect. (You can do this by bringing up the schedule sheet, and hitting the "Confirm" button).

Improvements:

• Ability to change circuit fuse for Easee Home sites.
• Power usage calculation for Equalizers improved.

Fixed:

• Charger help page LED types section no longer has text overlapping. Removed some states that aren't necessary.
• Equalizer name shown in Product card.
• No longer prompts a user to change the site name if the site is unnamed and the user isn't allowed to change the name.
• Avoids pausing audio playback for some phones. (Android)
• Fatal error codes now update product card in response to real time messages.

Improvements:

• Settings & Power management settings/menu cleanup for site, chargers and equalizers.
• Hide power at all times for circuits with just 1 phase.
• System status UI icons updated.
• Ability to reboot Equalizer (from Equalizer Settings / Commands).
• Ability to change site main fuse for Easee Home sites.

A minor bug fix for radio communication for secondary chargers.
Some users had to reboot their charger to communicate over EaseeLink RF to other chargers. This has now been fixed. 

• Improvements to the internal self-test system
• Internal wifi circuit improvement
• Fixed issue where charger used ‘online’ limits after loosing contact with Equalizer. 

Fixed:

• Equalizer Set WiFi is no working as it should (no longer spins forever).
• Charging Schedule fixes.

Improvements:

• Cars that are misbehaving and not responding as they are expected to now display an error.
• Updated help text for "Ready to Charge" charger status.
• Removed Refresh now button and timestamp in product cards.
• Confirmation Dialogs for sensitive buttons like deletions etc. on the left instead of the right.
• Privacy policy link in Profile.
• Languages in Language page are no longer translated.
• Updated status for Chargers when you cant charge because there's not enough available power in the house.
• Added Equalizer Main Fuse Limit
• Improved Lock / Unlock confirmation popup messages.

Illustration of error when a car has a possible fault and does not accept charge

Improved:

• Hide a few charger configs. properties:
• Allow only RFID keys
• Local radio channel
• Local short address
• Remote start required
• Smart button enabled

• Support for Swedish HAN on Aidon 6534.
• Support for non-Standard HAN on Kaifa MA304H4D.
• Update to L2 current estimation on Aidon 6525 and Kaifa MA304T3.
• Fixed missing data in app after initial startup on some meters.
• General networks improvements.

New:

• Able to set the "access level" of all chargers on a site

Improved:

• Changed name from "Whitelisted users" to "Approved users" under Access Control
• Translation updates

Imoproved:

• New and Improved handling of connectivity on wifi and cellular
• WiFi connection is more resilient.
• Faster firmware downloads on Wifi
• Improved connectivity error handling
• Improved logging and debugging of connectivity

New:

• My Page now shows sites you have access to
• Our Partners (Partner users) can now change the Site Owner themselves 🎉

Improved:

• Your Profile is now moved to the menu
• Translations update

New:

• Equalizer online/offline showing, charger online/offline updated too so it’s the same logic as the app
• Real-time updates of equalizer (when viewed from site products or my products).
• User contact details in Portal (email)
• Show Privacy policy - consent (Under my profile, consent)
• Change privacy policy to be URL’s
• Add translation versioning to help with browser caching issues
• Fix country field on-site edit
• Update to support new serials
• Update packages and translation files
• Copy all email addresses (whitelisted users on site)
• Set circuit to Easee Ready (the most appropriated charger will be automatically chosen as the primary charger)

Improved:

• Added toggle to show wifi password when you want to change it
• Fixed product search (on sites),
• Hide the “limited to single-phase charging” in configuration
• Several minor design & navigational improvements

Fixed:

• Add translation versioning to help with browser caching issues

New

• LED now uses a purple colour to indicate local control only (Easee Link).
• Added support for more Kamstrup power meters.
• Early version of phase mapping. Phase mapping will allow the Equalizer to detect installation mismatch between phases.

Improvements

• Improved 1-phase chargers connected to 3-phase IT networks (Requires charger with software v273+).
• Use max continous current instead of main fuse size (80%) for regulation in load balancing. Max continuous current will be selectable in the app later.
• General improvements to load balancing.
• Decreased power usage during software updates.

Fixed

• Fixed LED incorrectly showing no data from meter when started without wifi credentials.
• General fixes.

Fixed:

• Timestamps on charge sessions are now displayed in local time and not UTC.
• Displaying "Waiting for Smart Charge" in the Charger Product Card when charging is paused due to Smart Charging.

NOTE: The Start button to override Smart charging doesn't work at the moment, we hope to fix this as soon as possible. In the mean time you can override Smart Charging by hitting the Start button in the Tibber app.

Improvements:

• Added support for a new serialnumber format which is now a combination of numbers and letters.
• Removed charging session id from the Charge Session overview, this will be re-introduced once the session ID is more recognisable.
• Adjustments to some text styles and icons, some new icons, and various cosmetic fixes.
• Some tweaks to terminology and language used in various parts of the app.

Fixes and improvements:

• Signal Strength icons for WiFi and Cellular now changed to Easee Design.
• Fixed an issue where the app would crash if there was corrupted data in a site's power consumption
• "Add Product" card should always be at the end of your product cards, regardless of how many products you have.
• Adjustments made to the Profile page (Broken it down into several pages instead of just 1).
• Swiping too quickly between products would sometimes show the wrong max phase current in phase diagrams.
• Clicking the details for Phase Mode now works, not just the title text.
• Improvements to the information displayed in the Equalizer product card if Equalizer is offline

New features:

• Equalizer product card will now show LED animations.
• More information in Equalizer Instruction / Help pages (States / LED patterns).
• Charge session information available when the charger has completed charging. Charging session report gives you an overview or charging time and how much energy was transferred to the car battery. (Click View Session button that appears below the charger)
• Banner explaining the status of the Equalizer (Offline state).

Improved

- Improved voltage reporting to the cloud.

Fixed

- Fixed the ability to update device pulse/heartbeat interval from cloud.
- Fixed an issue where the charger was not able to start charging until the internal clock was synchronised with the cloud.

Fixes and improvements:

• Equalizers connected to non supported meters are now displayed correctly in the app and not displayed as a blank screen.
• Some cosmetic tweaks to the max circuit current slider page
  

New feature:

• It is now possible to set the default offline current for a site. This can be set to avoid fuse from tripping should there be a problem with cloud based energy balancing.

New:

• App now displays system status banner every time it is opened during a system outage situation
• Charge Price is now displayed in Site Settings. Only site admins and site owners for Easee Home sites can change that price in the app.
• Added ability to copy charger serial number to clipboard from Charger/Equalizer details page.

Improved:

• New Easee Design Icons in Product Card and other places of the app.
• Minor adjustments to the Charger/Equalizer Connect to WiFi screens.
• Made the Request-PIN-Code button a bit more visible in the Locate Pin Help page.
• Product Pin Code obscured by default in Charger/Equalizer details page.

Fixed:

• App loads quicker even when there is a problem in the cloud
• Charger light-strip colour is now correctly updated when disabling smart
  charging from the app (In some situations it would incorrectly show with the smart-charging blue colour).

Added option to change cloud connection endpoint.

Improved the chargers connection method to the cloud

This charger release builds on the previous 254 release with some additional adaptions on cloud connectivity behaviour.

• Increased cloud connection back-off timings
• Reduced data transmission to the cloud

New:

• Added ability for app to receive data in real-time from Equalizer
• It is now possible to restart a charger from Charger Settings.
  

Improved:

• Renamed Charger power management to Power options.
• Renamed Site power management to Power settings.
• Improved how the app handles the new system responses for commands like Scan for Wifi, Set Wifi and Start/Stop/Pause/Resume/Override.
• Prepared the app for future products and serial number formats
• Cosmetic tweaks to various info icon usage throughout the app.

Fixed:

• It wasn't possible to scroll on the products list page if you had a lot of products, now you can.

This small update also include changes found in v249

Improved

• Fixed an issue where it was not possible to configure new Easee Charge chargers using the local WiFi interface.
• Improved the retry mechanism for cable lock / unlock.

Features:

• Site Admins will also be able to see a site's total consumption, not just the Site Owners. Normal users will only be able to see their personal usage for the selected site.

Improved:

• App now handles the new charger response for lock/unlock charger cable correctly.
• Cosmetic tweaks made to the charger product card's charger name when the charging wave is disabled.
• Some tweaks to text displayed for various charger states (Unknown / Offline / Authenticating / Pausing / Resuming)
• Adjustments made to handle system downtime a bit better in the app.
• Using system error messages in a few more places, to make problems a bit more understandable.

New

• Added settings to enable future cellular connection types such as CAT-M1. Default cellular connection method has not been changed. 
• Added new signal quality methods to better handle new cellular connection methods
  
• Added the possibility of factory setting a charger when installed on a backplate with no tag

Improved

• Updated handling of non-recurring schedules; Better handling for a non-recurring schedule that includes stopping Time this feature is pending more changes in the app to be fulfilled.
  
• Prepared the chargers offline handling method to gain a better understanding of cloud control system being slow or offline and added better offline reason descriptions.
• Updated WiFi interface to support longer phone numbers
• Updated WiFi interface to not include main fuse size for charge and allow and higher circuit fuse values. If a circuit fuse is larger than 80A the installer Is asked to confirm that an additional protection fuse is installed.
• Updated Equalizer pairing logic to sync Equalizer information to cloud at the time of pairing and to extend the charger LED duration when pairing to make it more clear that an Equalizer was paired successfully.
• Updated logic for grid type detection; Added grid type detection with detected ground fault, automatic switching to 1-phase charging when there is a ground fault detection on IT 3-phase.
• Extended fuse balancing communication with Equalizer
• Session energy and current is now sent on every change
• Increased the number of possible schedule periods to 36 periods in total
• An ongoing charging session can now be stopped using any known Easee key for Easee home chargers. This means that User A can start charging and User B can stop charging. The charging session is linked to the user starting the charging session. 

Bug fixes

• We fixed so many small things it would be strange to list them all in the changelog. 96% of you would not understand what it means and 3% would question why that even was a bug and the last 3% of you rarely read this far down on a changelog. However, we can promise you that all the fixes we implemented will enhance your experience 🙌👍😅
  

Improvements:

• Support for new IT grid type ground fault warnings.
• Showing personal charge usage for Easee Charge site users.
• Updates to translations.

• Improved command handling with backend
• Updated translations

Fixed:

• Charge Robots disappearing from the app in certain conditions (Disconnection of cable / Awaiting Authentication).
  

Improvements:

• Minor Equalizer Product Card adjustments (Offline text).
• Adjustments to pull-down-to-refresh to make it slightly nicer.

- Improved error messages
- Added support to log in with full phone number and added support for internationalized numbers
- Updated translations

Fixed

• Tapping a product from the products list in the menu whilst having the "Add Product Card" active now correctly opens that product.

• Fixed phase diagram incorrectly displaying the same voltages for L1-L3 and L2->L3.

Improvements:

• Error messages for problems related to adding products are now easier for humans to understand.

• Haptic feedback added to Charge Robot LED Brightness/Max Charge Current Sliders, the pull to refresh component and most toggle switches.

• Notification for when a equalizer is added to a site is now handled properly.

• Easee Charge chargers are now added and removed in the app automatically when user has authenticated using Easee key

New:

• Easee app can now be used for Easee charge users
• Chargers will appear in the app for users if:
  • They have been added as a whitelisted user to a single charger.
  • Alternatively during an active charging session on a whitelisted charger where the user has been added as a whitelisted user to the site.

• Easee charge users can Authenticate, Lock/Unlock, Pause/Resume charging from the app. All other charger functions can be viewed but not modified or changed.
• Easee charge or Easee home users will now receive a push notification or SMS when they have been invited to a site or single product.
  

• Various new API's are now available:
  • Create or update a collection of circuits with backplates : POST: /api/sites/{id}/circuit_collection
  • Delete an empty circuit : DELETE: /api/sites/{id}/circuits/{circuit_id}
  • APIs for pre-program backplates and pair them to a site and circuit
  • New API error response types which are also translated in various languages
  • Add backplate : POST: /api/sites/{id}/circuits/{circuit_id}/backplates
  • Remove backplate : DELETE: /api/sites/{id}/circuits/{circuit_id}/backplates/{backplate_id}
  • Edit backplate: PUT: /api/sites/{id}/circuits/{circuit_id}/backplates
  • APIs for dedicated site power management settings GET: api/accounts?search={searchString}&offset={offset}&limit={limit}
  • Get settings : GET: api/sites/{id}/circuits/{circuit_id}/settings
  • Edit settings : POST: api/sites/{id}/circuits/{circuit_id}/settings
  • WiFi SSID and password on Equalizer can now be set through the Portal or the App using Easee Link.

• Site owner will now receive SMS & push notification when an Equalizer is added to a site
• Equalizer will now automatically appear for administrators or owners of a site.

Improved

• Standardised phone number format for international standards to better handle phone numbers with a region based prefix commonly used in Germany, UK, etc.
• Various security updates

Fix

• You can now use Charging schedules with Tibber again as a site operator as long as smart schedule is not activated. 

Improved:

• Terms / Privacy policy links point to translated versions for each supported language. 
  
• Improved Equalizer online/offline mechanism

New:

• Added ability to configure Equalizer WiFi via Equalizer Settings.
• You can refresh the current product by clicking the Refresh now button at the bottom of the product card.

Improved:

• Optimisation in logic for load balancing on IT grid 3-phase on Home chargers
• Minor improvements to enhance manufacturing process

New

We have made some changes to the charger software to prepare for support for the Equalizer.

See more about the Easee Equalizer here:

https://easee-international.com/no/tilbehor/equalizer/

Fixes

• Some minor fixes related to production

• The Easee app now speaks Spanish ¿Hablas español?
• When charging robot is waiting in queue because of load balancing this is now shown with a status message and the charging wave is paused.
• Some design tweaks here and there to improve the overall experience
• You can now click on a product in the product page to go directly to that specific product
• It is now possible to rename the Equalizer in the Equalizer settings + multiple minor preparations for Equalizer support
• Permissions updated for Easee Charge sites to allow users to lock/unlock cable, authenticate charging session  and pause/resume charging. 
• Eases systems status page accessible via the Support Page.
  

• Minor adaptions to partner-specific invitation letters
• Easee ready function is moved from site level to circuit level
• Several preparations for Equalizer API 
• The equalizer observations are now also pushed via stream

• Add endpoint to get chargers current lifetime energy by site : api/sites/{siteId}/energy
• Add new service to sync data for lifetime energy report
• Added new consumption report for charger lifetime energy
• Enabled flag for beta testers to set a user as a beta user.
• Only allow activation/deactivation circuits as Easee ready if there are no online chargers in that circuit
• Easee Key consumption report extend with name and owner of the scanned RFID tag
• Restructured the site invitation e-mail
• Enabled search for site endpoint
• Exposed ProductCode on my chargers API response
• Added Reboot charger with SMS functionality in API for support agents

• Added new consumption report for the charger lifetime energy allowing users to generate a report of a charger complete energy consumption since it's birth.
• Added warning for activation of Easee Ready circuits if the circuit has an online charger
• Various smaller improvements for internal support agents usage

• Improvement for new signups to ensure activation screen is presented even if the app is left open in the background
• Cosmetic fixes to Site Details page.
• It is now possible to set Easee as an operator from the app if there was no operator set. Users should no longer see the 404-155 error.
• Cosmetic tweaks to Charge Current Slider on some devices (no longer shows grey lines).
• Changing the partner via Easee Cloud or API, and then refreshing the app should work as intended now.
• Various smaller tweaks and improvements to give you an even better experience

New:

• You can now re-arrange products and sites by clicking the main menu -> Products.
  
• It is now possible to adjust the brightness of the chargers LED to various levels, even completely off.
• Various smaller design tweaks and optimisations to make our app even more Easee!
• Adjustments to the Product cards to make sure things still look good on small screens when you have lots of products added to the app.
• Danish, Dutch, French, German and Swedish language support.
• Some basic support for upcoming Easee Equaliser.
• Limit Charge Current renamed to Max Charge Current, adjustments to function and the look and feel.
• All help / info dialogs have been replaced with bottom sheets.
• Updates to the Add Product help pages for Chargers.
• If you've forgotten your chargers PIN code, or can't find it anywhere, you can request the PIN code after entering the serial for the Charge Robot.

Fixes:

• Some Android devices got stuck on the Splash Screen, that shouldn't happen anymore.
• You are no longer able to add a name to a site from the Product card action bar, if you don't have permission to do so.
  

Note: There has been a change to how the max charge current (Limit Charge Current) is set. Previous versions of the app set the dynamic circuit current, which is a property that is automatically adjusted by Tibber, and is also lost whenever the Charge Robot reboots. You might want to double-check the max charge current (Found in Site -> Power Management), to make sure it is what you expect.

• Preparations for supporting the Easee Equalizer in the portal
• Updated URL's to reflect the change from "chargers" to "products" in preparation of Equalizer support.
• Added new and improved graphics for Charger & Equalizer
• Depending on the type of user you are now re-directed to the best starting point in the portal. As a user, you are re-directed to Products
• Wi-Fi results now have buttons to click to use the available networks from the WiFi scan

Improved:

• Improved compensation for environmental temperature

Fixed:

• LED strip getting stuck in wrong display state on some occasions

• Charger state and dashboard now displays the reason for no current.
• Added refresh token functionality, so that you can get logged back in automatically
• Changed “chargers” to “products” on multiple views
• Charger config edit enabled again but removed unnecessary setting configurations 

Added more functionality for support agents and user management functions

• Added "ReasonForNoCurrent" observation as a part of the API so that it is possible to understand the reason for the charger not providing current.
• Added function in the API to inform clients that a schedule is modified, added or removed from a charger.
• Updated observations whitelisted for partner AMQP stream
• Extended pairing to an operator with additional settings
• Fix: Consider pending site user invitations when adding my chargers to avoid duplicate users on a site.
• Fix: Multiple site owners possibility.
• Several other minor improvements & security updates.

New features:

• Prepared system to be able to adjust brightness on LED strip (Not available in app yet)

• Improved logic for interrupted operation to automatically resume an authorized charging session in the event of power outage or restart.

• Various smaller improvements and preparations for future awesomeness!

Bugfix/improvements

• Fixed a bug where charger would swap to cellular even if cellular was not ready in the case of faulty wifi connection.

• Bugfix in load balancing for 3-phase IT grids

• Improved energy logging mechanism

• Added ability to see on a site what chargers have different access level than the site's permission level
• Added the ability to navigate to a charger from the access level overview
• Access level on a single charger can be removed from the list over unlinked chargers from the site
• Added ability to see more clearly on charger level if it is linked or unlinked to/from the site's access level.
• Cleaned up on redirections to mypage
• Minor fixes

• You can now add Easee Keys via the Charger.
• Added Push notifications for Started Charging / Stopped Charging for chargers you have access to in "My chargers".
• New error message when you try to open power management without a master charger added to the app.
• Added "Too many attempts error" message added to add charger page, instead of 400-2 error.
• Got Wifi? Encouraging users to connect charging robot to wifi network for faster updates.
• Improved logic behind Got WiFi message.
• Languages sorted alphabetically in Preferences.
• Font size in main app bar reduced.
• Tweaked accent colours.
• Signup API call payload now includes the device language code. To prepare for localised SMS activation messages.
• Dependancies for Keychain and Preference management now updated to the latest version.
• Renamed "Service provider" to "Operator".
• Fixed duplicate max and min value in Limit charge current slider.
• Phase info voltages are now shown as integers instead of numbers with 1 decimal.
• Signal Strength icon definitions for cellular and wifi were swapped, which was obviously not right, we fixed that.
• Confirmation snackbars for access level, cable locked changes now ON by default, can be switched off in Preferences.
• Show confirmation snackbars when you pause charging.
• Show Explanation Banner in Easee Keys screen, to clarify certain restrictions when it comes to Easee Key usage.

• Add new Easee Key reports that generates the reports based on easee key
• Ability to add VAT for sites and show VAT related columns for all the reports
• Add support for refresh token
  
  
  

• Added ability to show charger cover in dashboard (with it's color and LED state), it will change size with extra-wide option in display options.

• Added ability to change language and theme on login screen
• Added charging pulse animation and smart charging color
• Updated terminology for Site and Operator
• Added caching function for most common requests that can be cached
• Generate consumption report based on easee-key
• Added ability to show user consumption as administrator
• Added ability to set the price with VAT % or without VAT % with automatic calculation (See detailed description here)
  
  
  

• Show partner guide when pressing the Authenticate button for non-Easee partners
• Fixes some typos in a few places.
• Onboarding Text Cut-off issues Fixed for some smaller screen sizes.

• Added ability to use charger to read easee key or any supported RFID keytag to add new keys under user profile. 

• Improved dashboard loading
• Added Danish (DKK) as an available currency
• Translated Charger modes to be more understandable.
• Added a warning for master charger offline when the charger has been offline too long to show the capacity
• Menu and appearance improvements.
• Added settings for defining Access Control & offline behaviour for sites paired with Easee.
  • Allow any Easee keys when chargers are offline (Previously: AllowOfflineTXForUnknownID)
  • Allow known Easee keys when chargers are offline (Previously: LocalAuthorizeOfflineEnabled)
  • Always allow known Easee keys (faster approval) (Previously: LocalPreAuthorizeEnabled)

• Added message about charger Firmware not being updated until car is disconnected
• Added link to site from my chargers
• Added link to public knowledgebase for portal documentation and help
• Added charger colour so that chargers show up with the colour they have in real life
• Improved overall styling
• Removed advanced config edit for users who are not global admins or operator
• Removed reserved and used from capacity
• Various small improvements
• Fixed issue with main fuse capacity not updating

• Now using new observations for circuit capacity via master charger
  • CircuitTotalAllocatedPhaseConductorCurrentL1
  • CircuitTotalAllocatedPhaseConductorCurrentL2
  • CircuitTotalAllocatedPhaseConductorCurrentL3
  • CircuitTotalPhaseConductorCurrentL1
  • CircuitTotalPhaseConductorCurrentL2
  • CircuitTotalPhaseConductorCurrentL3
• Added new Easee Favicon
• Added confirmation on "update charger" so that it is easier to see that an update was initiated.
• Fixed layout for change password confirmation page
• Fixed layout for confirm email
• Updated dependencies

NOTE: Some functionality requires Charger Firmware v217

• FIX: Makes sure the Activate button in the Activation PIN code entry screen is enabled when it ought to be.
• Fixes some typos in a few places.
• Better error handling when adding Easee Keys.
• Tweaks to unify fonts and spacing in the product card.

New features

• Scheduled charging (Only for Easee App users) - Supported via Easee App. It is possible to override the schedule to force start when a car is connected. The override lasts until the EV disconnects. Note that other systems on a circuit level (e.g. smart charging, load balancing etc.) may control the output current even if the schedule is overridden.

• RFID pairing mode (Only for Easee App users) - Use the charger as an RFID scanner.

• Load balancing over Easee Link WiFi - Use Easee link WiFi as a backup channel for local load balancing. This requires all chargers to be connected on the same Local WiFi network.

Improvements

• Improved charging speed on Audi e-tron on IT-3Phase
• Cellular-wifi swap - Updated logic for WiFI / Cellular swap.
• Improved load balancing - Improved the algorithm for load balancing to make it fairer.

Other

• Improved logic for WiFi search functionality 
• Updated German translations

NOTE: Some functionality requires Charger Firmware v217

• Fix for stuck on splash bug reported by 2 users on certain devices.
• New User Flow for Smart Charging via Tibber.
• New User Flow for Scheduled Charging (Play/Pause/Resume/Authenticate buttons).
• Cleanup and finalisation of Scheduled charging.
• General UI Cleanup / Localisation Tweaks / Paddings / Icons
• Product Instructions contains more information + extra info on the charger's current state.

• Gather all circuits capacity bars
  
• Link to installation video on create new site
• Added new observation for dynamic charger current
• Pause and resume charging is now based on dynamic charger current state
• Notifications on what’s new in this version
• Added Batch operations on site, circuit or specified chargers to be able to execute mulitple oprations in one easy setting.
• Update Wi-Fi
• Added new error codes
  • 211 Charger did not respond in time
  • 212 Charger firmware does not support operation
• Added masters only for Batch operations option
• Added missing error codes 102, 190 and 410.
• Batch for reboot, set enabled and upgrade firmware
• Added button for feedback portal for users to submit feedback, ideas & suggestions
• Added a link to the public changelog
• Added ‘my chargers’ so that users can manage products they personally have access to
  • Add charger / Remove charger
  • Show details and configuration of charger
  • Added charger info - ‘Not paired’ if not paired to a service provider.
  • My chargers view hides comments for charger
  • Adding new charger changed to say product instead of charger

v 1.0.1

NOTE: Some functionality (like schedule charging, pause/resume charging and clear wifi-config) requires firmware versions that has not been released yet. We are still working on those and hope to get them ready ASAP. You can check the firmware version of your charger in Charger Settings / Details.

* Tweaks to onboarding

* Tweaks to product card drag down gestures (Product card movement was wrong compared to finger drag speed).

* Decrease of icon sizes for priority and schedule

* Changed charger standby status title and description

* Swipe between chargers across all sites (This is Defaulted to ON, can be switched off in Preferences).

* Flashing blue lightstripe for charger if its awaiting start with smart charging enabled.

* Clear wifi settings now possible (Requires firmware version v215)

* Schedule charging (Requires firmware version v213)

* Pause / Resume charging in OPEN access mode (Requires firmware version v213)

v 1.0.0

* Remove Charger Wi-Fi network button hidden.

* Connectivity information added to Charger Details.

* Tap charger image / phase diagram or wave animation to toggle phase mode displayed.

* Tweaks to onboarding animations (shimmer animation is no more, and other tweaks).

* Fixed onboarding image aspect ratios, font tweaks.

* Alignment tweaks across the board.

* Enter Wi-Fi network manually.

v 0.6.0

* New icons for cable locked / access level

* Show the access level button as icon when it is disabled, either because of user role or because of non-easee service provider.

* Show partner guide without ability to swap partner if the service provider is not easee, and the user role is such that the user would normally be able to change the level.

* Scheduled charging UI fixed up, with regard to fonts and styling.

* Scheduled charging repeat daily switch is now disabled unless you have a start / end time set.

* Scheduled charging now requires both start time and end time to be valid, you can no longer choose a start time without an end time.

* Scheduled charging hooked up to new APIs.

* Pause / Resume functionality now working, with a pause / resume button for chargers set to open access.

* Paired Partner renamed to Service Provider and moved out of Site Settings into Site Details.

* You can no longer change the service provider at all, only see what it is.

* Site charging price is no longer visible in the app.

* You can no longer see the charge price in Site consumption.

* Onboarding now showing after signup or login, or if you are logged in and you haven't seen it before.

* Replay onboarding button added to Support page

* Configure Wifi in Charger Settings if you are an Admin or Owner of EH chargers, and if you are an Owner of EC chargers.

* Tweaks to error handling of API calls.

* Tweaks to animation in the site page.

* Hamburger menu button a bit bigger now

* Changed start / stop charging button font

* Average consumption info added to site instructions page.

* Fix for site consumption tabs on smaller screens and non-standard text sizes.

* Loads of cosmetic tweaks, alignment and positioning of info on charger card.

* Charger instructions cabled locked section now has 3 items in it, Locked, Always locked and Unlocked.

* Charge price keyboard and text formatting now fixed so its based on the OS region, but its no longer visible, so not relevant.

NOTE Charge Schedule: Charge schedule does not seem to do anything yet, you can set it, but the charger doesn't start.

NOTE Charger Wifi Config: You can get a list of networks and configure it for the charger, but once its set you cannot remove it. Also the stability of this isn't the best, so you might see quite abit of "The charger rejected this command" errors when trying to use it.

v 0.5.3

* Ability to rename your easee keys.

* Contact customer support and i have a suggestion buttons reachable from the support page in Menu.

* Paddings, alignments and fonts fixed up.

* Charger info page / Site info page getting there, but needs some content.

* Tapping the first time consumption hint bubble now closes it.

* Site type now supplied by API and displayed in Charger Settings / Details.

* Adjustments for small screens.

* Systemwide back button now custom.

* App bar fixes in landscape mode

* Charger Offline fixes + tweaks

v 0.5.0

* Add product button in Side menu works again.

* Removed errors / warnings from charger details.

* Product card info has status information now + expandable / collapsible sections [WIP]

* NFC support improved quite a bit on both iOS and Android (Supports more types of NFC tags)

* I Need support and I have a suggestion links added to Side menu.

v 0.4.8

* NOTE: If you end up with 2 android app icons, remove version 0.4.5 or 0.4.2

* Lots of cosmetic tweaks regarding text styles and padding

* iPad support removed from iOS.

* User role for site moved to Site Details

* User role for charger moved to Charger Details

* NFC scanner on android improved to support more versions of Easee Keys.

* Invalid pin / serial error message displayed when adding a product with invalid info.

* Analytics added.

* Errors / Warnings for all the site / chargers showing in Diagnostics.

* Charger warnings no longer displayed in the charger card.

* Charger warnings / Errors removed from Charger Details

* Charger errors a bit more prominent in charger card.

* Available charge current renamed to Limit charge current

* Site details with more information about the site

* New disclosure arrow icon in all cells and buttons.

* Partner guide shown for schedule charging, start/stop, access control

v 0.4.5

* Audio playback is no longer stopped on iOS when the wave animation is shown.

* Add Easee Key via iOS NFC scanner added and improved.

* User role for the Charging Robot shown in Charger Settings (Owner, Admin, User)

* User role for the Charging Site shown in Site Settings (Owner, Admin, User)

* Info button added to Site Settings, with information about the different user roles and what that implies.

* Better error handling for Charging Robot information in Charger Card.

* You can now disable the charging wave animation and show the charging robot whilst charging.

* Account activation following account creation is now done with an activation code instead of an activation link. This is because some telephone operators block SMSs containing links.

* Descriptions added to Phase modes, the selection checkmark has been easeefied.

* Add Product Help Popover now animates between manual/charger image.

* You can now change the site charge price / currency in Site Settings.

* Removed "Level of Access" from Site Settings.

* Charger wiring/grid errors now displayed in charger card, with accompanying red lightstrip to make it clear there's something very wrong.

* Charger wiring/grid errors and warnings displayed in Charger Settings / Details when appropriate.

* Info button with accompanying popup for information added to Available Charge Current page.

* Wave animation when charging will no longer freeze.

* Remove charger from account API now fixed, and required changes in the app done, so people can now remove chargers from their account in the app if they so desire.

* Charger colors in Charger settings now split up into 2 pages, Cover color and Wave color

* Show kW values above the charger during charging when the wave animation is disabled and the robot is showing, WIP

* If you have a non-Easee partner selected, you are not offered the full list of partners, simply a dialog asking if you want to switch to Easee.

* Tweaks to Product Added page, strings localised.

* Certain site / charger setting changes are now persisted in the database, which means if the app is started offline, those changes are reflected in the UI.

* Tweaks to toggle switches

* Activate button displayed in charger card if the charger is disabled.

* Info and signal strength indicators in charger card should no longer disappear.

* Tweaks to tapping targets when the charger card is scrolled up a bit.

* Tweaks to error states that are displayed following a failed sites/chargers request, and you have no sites/chargers.

* Configure Wifi for charger pages completed, but not shown because we are waiting for the APIs.

* If you try to login to an inactive account (101:AccountNotActivated), the app will ask the API to re-send an activation code, and push into the activation page.

The biggest update to the Easee portal to date! Lot´s of new features for owners and administrators. A completely new dashboard for charging sites with multiple status overviews about the sites health. As an operator you can toggle mulitple filters and views to tailor your dashboard to your needs. Keep it simple or activate mulitple detailed low level statistics for debugging. Improved design for large screens and implemented a dark mode feature. 

Do you have any new feature suggestions? Submit them here.

Detailed changelog

New & Improved:

• Added menu for language selection
• Norwegian (NB) language added
• Wider page resolution for desktop
• Completely rounded corners for tabs and site box
• Site list collapse and tabs styling update
• Changed charger status "idle" to "standby"
• Spacing on entering and displaying easee keys
• Added menu for logout
• Adjusted max height for comments and activity
• Implemented "Pill design" for tabs
• Adjusted mobile number field for sign up
• Multiple chargers view (dashboard)
• Seeing selected site and charger name in title
• Updated label for create site
• Updated circuit text
• Updated to use real time status (websocket/signalr)
• Improved chargers view when loading data
• Queue system for real time status
• Disconnect and reconnection system for signalr
• Updated a lot of views for mobile and tablet size screens
• Beta select env to point towards
• Confirmation on delete easee key
• Handle 404 errors for site or charger
• Show "load level" for sites and circuits (capacity)
• Updated output phase text
• Backplate + master backplate ID showing in dashboard
• Showing smart button enabled
• Showing if charger is enabled or disabled
• Showing low charging current activated
• Showing if cloud auth is required
• Showing if local auth is required
• Showing if smart charging enabled
• New observations showing

  • LED

  • Phasemode

  • Enable idle current

  • Smart charging

  • Local auth required

  • Auth required

  • Detected grid type

  • Local RSSI

  • Local node type

  • Cable rating

• New "PollAll" button
• Update configuration for

  • Enabled

  • Enable idle current

  • Local cable permanently

  • Phase mode

  • Smart button enabled

• Smart charging

• New easee font

• Radio map with structure of nodes pr circuit

• Displaying local node type 0 / searching in red color in radio map

• Charts for capacity live trending

• Showing backplates without charger as "Easee ready"

• Showing maximized dashboard (100% screen width)

• Selecting view types on how many columns for circuits

• Display mode (experimental), concept for display screens

• Transparent easee keys photo

• Dark theme

• Led mode descriptions

• Op mode descriptions

• Better feedback on enable/disable locking and rebooting charger

• Real time state updating on charger view

• Start and stop charging from charger view if Authorization required = true

• Updated some of the charger icons and added error icon

• Better link colors

• Charger is shown as offline when reboot is pressed, comes online again when has update from real time system

• Pause and resume charging

• New properties for configuration

• Scan for Wi-Fi

• Set Wi-Fi SSID and password for charger

• New charger configurations; 

  • Local Pre Authorize Enabled

  • Local Authorize Offline Enabled

  • Allow Offline Tx For Unknown Id

Fixed:

• Fixed removing selected partner after removing pairing

Improved

• Charging schedules now using improved bottom sheet design.
• Pull down to refresh improved.
• New Custom loading indicator used in most places.

Fixed

• No longer crashes on iPhone 5s/6 (and other iOS devices without NFC) on iOS 12.4.8

Beta for Solar/Surplus charging

New feature enabling charging your car with own produced energy

In the Easee app you can now select between two modes:
- Solar -  Will charge your car using only surplus energy
- Grid + Solar - Will use energy from grid and surplus energy

Not supported:
- Solar charging on 3-phase IT-grids
- Solar charging with Micromatic/Janitza modbus meters
- Solar charging with Easee Equalizer AMP (will come as an update later on)

Fix for Kamstrup HAN meters with Embriq interface